Mobile Technician II
Company: Penske Logistics
Location: Bellevue
Posted on: September 19, 2024
|
|
Job Description:
Mobile Technician II 2410 Railway Ave., Everett, WA 98201
Exciting New Road Tech Program! Position Summary: Penske Mobile
Technician II will generally assist in the repair and diagnosis of
major components or remove/replace major components at the
direction of the PFM Asset Supervisor. Expectations include the
ability to perform preventive maintenance (PM) service and to
diagnose and repair the following with little or no supervision:
Clutches, PTO Systems, Electric Systems, Hydraulic/Air Brake
systems, Heating/Air Conditioning Systems, and Instruments and
Gauges. This position is managed by our corporate team, and the
Mobile Tech II will not work on equipment in a Penske facility.
Major Responsibilities: Demonstrate proficiency in the repair and
diagnosis of: Engines (gas and diesel); Power train to include
differentials, transmissions, clutches, drive shafts, PTO’s and
wheel ends; Electrical systems including starters and alternators;
HVAC systems; Steering systems; Electronics to include ECM’s,
ECU’s, sensors, etc.; Engine bolt on items such as turbos, fan
clutches, injectors, cooling system, etc.; Brake systems including
ABS; and Suspension systems (spring and air) Perform mechanical and
general appearance reconditioning of equipment for “trade-ins” and
prepare new equipment for delivery. Identify and determine parts
required for repair of disassembled units Perform all levels of
preventive maintenance services Perform duties with little or no
supervision in a timely and efficient manner Identify warrantable
repairs and document on repair order Maintain on-site work area
appearance, safety, and environmental compliance. Comply with all
Penske and Customer work requirements Road test Vehicles when
necessary to diagnose malfunctions or to ensure that they are
working properly. Use hand tools such as screwdrivers, pliers,
wrenches, pressure gauges, and precision instruments, as well as
power tools such as pneumatic wrenches, welding equipment, and
jacks and hoists. Inspect brake systems, steering mechanisms, wheel
bearings, and other important parts to ensure that they are in
proper operating condition. Perform routine maintenance such as
changing oil, checking batteries, and lubricating equipment and
machinery. Adjust and replace brakes, tighten bolts and screws, and
reassemble equipment. Inspect, test, and listen to defective
equipment to diagnose malfunctions, using test instruments such as
handheld computers, motor analyzers, chassis charts, and pressure
gauges. Examine and adjust protective guards, loose bolts, and
specified safety devices. Inspect and verify dimensions and
clearances of parts to ensure conformance to factory
specifications. Specialize in repairing and troubleshooting of
major components such as engine, transmissions and differentials,
to include replacing complete assemblies, turbochargers, fuel
system components etc. Order, receive, and charge out parts.
Maintain control of parts inventory, including cores, via cycle
counts and proper inventory management. Serve as primary customer
contact for day-to-day customer needs, and escalate as required to
sales/operations management. Manage tire and wheels, both on
equipment via inspections and in inventory. - - Follow Penske
safety practices at all times. Other projects and tasks as assigned
by supervisor Why Penske is for You: Competitive starting salary
Shift Premiums Career stability Opportunity for growth Excellent
benefits, including lots of time off Strong, well-rounded training
on a variety of OEM equipment (Penske’s Technician Certification
Program is certified as a Continuing Automotive Service Education
provider) Advanced vehicle maintenance technology Location and
schedule flexibility Qualifications: 2-4 years practical experience
with tractor trailer maintenance required High school diploma or
equivalent required Vocational/Technical or certification preferred
Specialized training in the repair and replacement of vehicle
components preferred Proficiency in the use of shop tools required
Current CDL license with air brake certification required,
willingness to acquire CDL if you do not have one. DOT medical card
and/or ability to obtain DOT medical card prior to commencing work.
Ability to read a map. Ability to operate a 26,000 non-articulated
vehicle safely and professionally. Ability to utilize mapping tools
(e.g. Waze) Self starter who is able to work with minimal direct
oversight. Basic computer skills required for data entry into
maintenance systems. Ability to work in non-climate controlled
conditions required The associate will be required to understand
and comply with specific instructions, guidelines, rules,
regulations, or other information established by Penske management
The associate must be able to perform all work adhering to DOT,
OSHA, and all Penske safety and maintenance policies; including but
not limited to the correct selection and use of appropriate tools,
PPE, machine guarding, and established best safety practice.
Regular, predictable, full attendance is an essential function of
the job Willingness to travel as necessary, work the required
schedule, work at the specific location required, complete Penske
employment application, submit to a background investigation (to
include past employment, education, and criminal history) and drug
screening are required Physical Requirements: The physical and
mental demands described here are representative of those that must
be met by an associate to successfully perform the essential
functions of this job. Reasonable accommodations may be made to
enable individuals with disabilities to perform the essential
functions. While performing the duties of this job, the associate
will be required to move frequently, stand, walk, climb, bend, and
sit for extended length of time throughout their scheduled working
period. The associate is required to use their hands on a routine
and daily basis to grasp, reach, touch, handle, feel, and/or
otherwise operate required tools or controls. The associate must be
able to work safely at heights using applicable ladders and
elevated working platforms. The associate must be able to safely
work in all weather conditions. Given the frequent movement of
large trucks through the workplace, the associate must be able to
see and hear in order to safely navigate the work environment. The
associate must be able to regularly lift and/or move up to
50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg.
Penske is an Equal Opportunity Employer. Salary: $33.79/hourly plus
10% mobile pay Hours: Mon - Fri 2nd shift Shift Differentials:
Second shift start times after 11am are eligible for $1.50 per hour
shift differential Third shift start time after 9pm are eligible
for $2.00 per hour shift differential Benefits: Our excellent
benefits plan keeps associates and their families happy, healthy,
and secure. To learn more visit https://penske.jobs/benefits/ PJ500
ABOUT US About Penske Truck Leasing/Transportation Solutions Penske
Truck Leasing/Transportation Solutions is a premier global
transportation provider that delivers essential and innovative
transportation, logistics and technology services to help companies
and people move forward. With headquarters in Reading, PA, Penske
and its associates are driven by a dedication to excellence and a
commitment to customer success. Visit Go Penske to learn more. Date
posted: 09/12/2024
Keywords: Penske Logistics, Bellevue , Mobile Technician II, IT / Software / Systems , Bellevue, Washington
Click
here to apply!
|